Beli nord lock di monotaro.id

Kami Menampilkan Rekomendasi Kami Untuk Anda! Anda Bisa Membelinya Kapan Saja di monotaro.id
  1. Nord-lock Washer
    Mulai

    Rp379.900

    Nord-lock Washer
    Deskripsi:
    Ring Dari Nord Lock ini memiliki ukuran M6
    atribut:
    • Bolt Size: M6
    • Dimension D (mm): 6.5
    • Dimensions t (mm): 2.2
    • Dimensions d (inch): 0.26
    • Diameter: 15/64 inch
    • Size: M6(15/64 inch)
    • Dimension D (inch): 0.43
    • Dimension T (inch): 0.09
    • Dimensions d (mm): 10.8
  2. TRUSCO Wedge Lock Washer
    65%
    Mulai

    Rp76.000

    TRUSCO Wedge Lock Washer
    Deskripsi:
    - It is strong against all vibrations, it is a loose stopper which is not affected by lubricating oil and others.- Railway, shipbuilding, construction, automobiles and any industry that uses screws
    atribut:
    • Mass (g/pack): 7.0
    • Nominal Diameter: NL5 (M5)
  3. NORD-LOCK JAPAN Nord-Lock Washer Iron (Sc Hardened Material)
    Mulai

    Rp299.900

    NORD-LOCK JAPAN Nord-Lock Washer Iron (Sc Hardened Material)
    Deskripsi:
    Two Nord-Lock washers are paired, and a wedge-shaped cam is applied to the mating surface.The wedge angle is set larger than the screw angle of the bolt, so not only does the bolt not loosen, but also due to the wedge effect Bolt tension increases. In addition, teeth are cut radially on both outer surfaces, and as the bolt is tightened, the teeth bite into the nut, the bolt surface seating surface and the tightened object, and are fixed. Reusable without being affected by temperature. Use with flat washers is prohibited 1 set of 2 sheets
    atribut:
    • Surface Hardness: HRA 75±4%(HRC48)
    • Heat Resistance Temperature (°C): -20 to 300
    • Thickness T (mm): 2.5
    • Surface Treatment: Delta protection (chrome-free)
    • Outer Diameter (mm): 13.5
    • Nominal Dimensions of Screw: M8
    • Material: Iron (SC hardened material)
    • Nominal Size: M8
    • Thickness (mm): 2.5
    • Type: Nord lock washer
  4. SKF Lock Washer untuk Mur Pengunci Metric
    Mulai

    Rp11.000

    SKF Lock Washer untuk Mur Pengunci Metric
    Deskripsi:
    MB and MBL lock washers are locking devices, used to secure KM, KML and HM. T lock nuts onto a shaft or adapter sleeve and prevent unintentional loosening. MB. A is a stronger version of the MB washer. The lock washers engage a keyway in the shaft or adapter sleeve thread. They lock the nut in position when one of the washer tabs is bent into one of the slots in the outside diameter of the lock nut. A new lock washer should be used each time the corresponding lock nut is installed.
    atribut:
    • Locking Device: Lock washer
  5. NTN Lock Washer
    Mulai

    Rp3.000

    NTN Lock Washer
    atribut:
    • Tab Type: Bent Inner
  6. Yoshinobu Cotter Pin White Pack Kecil
    Mulai

    Rp289.900

    Yoshinobu Cotter Pin White Pack Kecil
    Deskripsi:
    Cotter Pin dari Yoshinobu memiliki ukuran dari 2-5 mm
    atribut:
    • Color: White
    • Material: Steel
    • Treatment: Galvanized
  7. monotaro.id Cotter Pin/Spipen Pack Kecil
    Mulai

    Rp299.900

    monotaro.id Cotter Pin/Spipen Pack Kecil
    atribut:
    • Color: White
    • Coated: Galvanized
    • Material: Steel
  8. Yoshinobu Cotter Pin White Pack Besar
    62%
    Mulai

    Rp109.900

    Yoshinobu Cotter Pin White Pack Besar
    Deskripsi:
    Cotter Pin dari Yoshinobu memiliki ukuran dari 2-5 mm
    atribut:
    • Color: White
    • Material: Steel
    • Treatment: Galvanized
  9. HAFAS Cotter Pins SS304
    Mulai

    Rp2.099.900

    HAFAS Cotter Pins SS304
    atribut:
    • Material: SS304
    • Product Code: PCP50MCPL
  10. monotaro.id Cotter Pin/Spipen Pack Besar
    Mulai

    Rp299.900

    monotaro.id Cotter Pin/Spipen Pack Besar
    atribut:
    • Color: White
    • Coated: Galvanized
    • Material: Steel
  11. THE Washer Plate SS304
    Rating:
    100% of 100
    (1)
    Mulai

    Rp15.000

    THE Washer Plate SS304
    Deskripsi:
    Ring Plat dari brand THE ini mempunyai ukuran M4-M36 dan cocok untuk semua industri manufaktur
    atribut:
    • Material: SS 304
  12. SKF Lock Nut with Metric Thread
    Mulai

    Rp42.000

    SKF Lock Nut with Metric Thread
    Deskripsi:
    KM and KML lock nuts are used to locate bearings onto a shaft. They have metric threads and four equally spaced slots located around their circumference to accommodate a spanner. They should be locked by a lock washer to prevent unintentional loosening. KM and KML lock nuts can be reused, provided they are not damaged.
    atribut:
    • Nut for Hydraulic Mounting: No
  13. TRUSCO Wedge Lock Washer
    Mulai

    Rp169.900

    TRUSCO Wedge Lock Washer
    Deskripsi:
    -Strong against all vibrations, locking which is not affected by lubricating oil and others.-Very easy to attach/detach.-Can be used with any screw which is commercially available.
    atribut:
    • Nominal Diameter: M14 (NL14)
  14. JTC Split Pin
    Mulai

    Rp179.900

    JTC Split Pin
    atribut:
    • ROHS Directive (Corresponding to 10 Substances): Correspondence
  15. SAN OU Drill Chuck
    Mulai

    Rp38.000

    SAN OU Drill Chuck
    Deskripsi:
    Mesin bor duduk atau mesin bor tegak pada dasarnya merupakan mesin bor yang digunakan untuk membuat lubang persisi. Drill press ini menggunakan poros utama yang digerakan naik turun dan umumnya penggunaannya disesuaikan dengan kebutuhan. KEPALA BOR DUDUK adalah spare part untuk kegunaan mesin bubut sebagai mencekram mata bor nya.
    atribut:
    • Material: Steel
Daftar Harga nord lock Terbaru September 2025
Nord-lock WasherRp379.900
TRUSCO Wedge Lock WasherRp76.000
NORD-LOCK JAPAN Nord-Lock Washer Iron (Sc Hardened Material)Rp299.900
Langsol Universal Adaptor for Drill ChuckRp239.900
SKF Lock Washer untuk Mur Pengunci MetricRp11.000
NTN Lock WasherRp3.000
Yoshinobu Cotter Pin White Pack KecilRp289.900
monotaro.id Cotter Pin/Spipen Pack KecilRp299.900
Yoshinobu Cotter Pin White Pack BesarRp109.900
HAFAS Cotter Pins SS304Rp2.099.900

Data diperbarui pada 10/09/2025 (Harga belum termasuk PPN)

Halaman Terkait